How It Works
You set two thresholds on the EDGE Humidity Controller - a Start value and a Stop value. When humidity drops to your Start value, the controller powers the humidifier. Once humidity climbs back up to your Stop value, it switches off - automatically, with no manual watching or adjusting.
| Setting | What It Does |
|---|---|
| Start value | Humidity level that turns the humidifier ON |
| Stop value | Humidity level that turns the humidifier OFF |
This same controller can also operate a dehumidifier (not included) using the same Start/Stop logic in reverse, if your setup ever needs to reduce humidity instead.
Automatic Humidity Regulation
No more manually turning a humidifier on and off. Set your Start and Stop humidity, and the EDGE Humidity Controller does the rest - running the humidifier only when it's actually needed.
Right-Sized for Grow Tents
The 4L tank covers up to 30m² and runs roughly 12–14 hours per fill at max output, so most grow tents get a full day (or more) of coverage between refills.
Mist Where You Need It, Water Where You Don't
The included flexible hose lets you direct mist exactly where your plants need it - and route the hose so the humidifier itself can sit outside your tent if that's more convenient for your setup.
Specifications
Humidifier
| Capacity | 4L |
|---|---|
| Material | PP + ABS |
| Dimensions | 7.48" × 7.48" × 13" (190 × 190 × 330 mm) |
| Weight | 2.43 lb (1.1 kg) |
| Power rating | 25W |
| Max mist output | 280 mL/h |
| Coverage area | Up to 30m² (actual coverage varies with environmental conditions) |
| Run time | 12–14 hours per fill |
| Noise level | Under 30 dBA |
| Atomization | Ultrasonic |
| Rated voltage | 110–220V AC, 50/60Hz |
| Ambient light | 3-color LED, automatic cycling (not independently controllable) |
EDGE Humidity Controller
| Model | AG/EDGE/HC/W2023 |
|---|---|
| Operating voltage | 110–220 VAC |
| Humidity measurement range | 0–99% RH |
| Humidity resolution | 0.1% RH |
| Output type | Direct socket output |
| Output capacity | 10A max, 1500W max |
| Dimensions | 4.65" × 2.36" (118 × 60 mm) |
Warranty
| Coverage | 1 year from purchase - manufacturing defects in materials and workmanship |
|---|
FAQs
Set a Start value (when the humidifier turns on) and a Stop value (when it turns off) on the EDGE Humidity Controller. It handles the rest - no manual adjusting.
The humidifier holds 4L. To refill, lift the tank off the base, unscrew the cap, fill with clean water (distilled or purified recommended), then reattach the cap and place the tank back on the base.
No. This is a dedicated Humidity Controller with its own built-in sensor and Start/Stop settings - separate from the EDGE Controller included in the Ventilation Kit.
The included flexible hose lets you direct mist exactly where it's needed, and can allow the humidifier to sit outside your tent if that suits your space better. Route the hose without dips or low points, since trapped condensation can restrict mist flow.
It depends on your crop and growth stage - young seedlings and cuttings generally want higher humidity (roughly 65–75% RH), while flowering and fruiting stages typically want it lower (roughly 40–55% RH). Check your specific crop's guidelines for best results.
Yes - EDGE is designed to integrate well with Walden White tents, and is also compatible with most similarly sized grow tents.
Grow Smarter, Not Harder
Let us know how we can help you grow happier and healthier mushrooms in your home or commercial facility
