How It Works
The kit's three LoPro Edge fixtures use two separate connections: AC power and 0–10V control. Both daisy chain from fixture to fixture, so the whole system runs from a single chain. Add the optional EDGE Controller to set output for all three fixtures at once, or run them without a controller at full output.
| Connection | How It Works |
|---|---|
| Power | 120–277V AC input, wired separately from control |
| Fixture-to-fixture power | AC power daisy chain: up to 3 fixtures at 120V, 4 at 208V, 5 at 240V, 6 at 277V. At 120V, this kit's three fixtures use the full chain. |
| Fixture-to-fixture control | RJ11 from one LoPro Edge to the next, so all three fixtures dim together |
| Control to EDGE Controller | RJ11 cable from the first fixture to the controller's LAMP port for 0–10V dimming (controller sold separately) |
| Without a controller | Fixtures operate at full output |
With the EDGE Controller connected, the LAMP channel can run in any of the controller's modes: Off, On (fixed output), Auto (responds to your temperature targets, including reducing light output if temperatures climb too high), Timer (scheduled), or Cycle.
Do not exceed the maximum number of fixtures in a power daisy chain, and always follow applicable circuit, connector, and electrical-code requirements. Disconnect power before installation, adjustment, or servicing.
Sun White Pro Spectrum
All three LoPro Edge fixtures in this kit use our Sun White Pro spectrum, a balanced, white-based commercial production spectrum. It starts with 5000K white LEDs and a blue peak near 450 nm, then adds supplemental 660 nm deep red and 730 nm far red. It isn't built around heavy red or the warm, flower-only look of many consumer grow lights. Designed for rack and shelf growing, it covers a wide range of crops, from compact vegetative growth through flowers and fruit.
| Spectrum Component | Detail (per fixture) |
|---|---|
| Blue | Output concentrated around 450 nm, with a peak wavelength of ~450 nm |
| White (5000K) | Broad output across approximately 500–650 nm; 5,209K CCT, 85.7 CRI |
| Deep Red | Supplemental output at 660 nm |
| Far Red | 730 nm; 13.35 µmol/s per fixture, about 3.17% of 400–800 nm PPF |
| Red : Far-Red Ratio | 11.49 |
| LED Types | 3030 5K + 3030 Red + 3030 730 nm |
Where warm, red-heavy spectrums are tuned for flowering alone, Sun White Pro is built for whole-crop production. Blue light is associated with compact vegetative growth, and the added red and far red support flowering and fruiting. Because the light is white, you can also see plant color and health accurately, with an 85.7 CRI.
Dimmable From the EDGE Controller
LoPro EDGE features 0–10V dimming. Connect it to the EDGE Controller's LAMP port with RJ11 and the controller sets its output level directly, from 0–10V. That includes automatically reducing light output if temperatures climb too high.
High Output for High-Light Plants
160W delivers 432 µmol/s of PBAR at 2.70 µmol/J, with an average of 400 µmol/m²/s PPFD across a 2' × 4' area at full output. Built for high-output vegetables and other high-light crops, at home or commercial scale.
Full Spectrum for Color and Quality
The upgraded Sun White Pro spectrum combines 5000K white, a blue peak near 456 nm, 660 nm deep red, and 730 nm far red, tuned for vegetables, herbs, and flowering plants.
Low Profile, Easy to Hang
A slim 4-foot fixture, about 46.5" x 13.25" × 2", with two parallel LED bars. It hangs from four mounting clips, two per end, using the included hydroponic hangers.
Daisy-Chain Power and Control
- Power: chain AC power from fixture to fixture, up to 3 fixtures at 120V, 4 at 208V, 5 at 240V, or 6 at 277V.
- Control: link fixtures with RJ11 so they dim together from one EDGE Controller.
Power and RJ11 control are separate connections. Do not exceed the maximum number of fixtures in a power chain, and always follow applicable circuit, connector, and electrical-code requirements.
Built Into the Walden Grow Tent Kit
Our top-tier Walden kit pairs three LoPro Edge fixtures, one per shelf, with the EDGE system for a complete high-end growing setup.
Specifications
At a Glance
| Total lighting | 480W (3 × 160W LoPro Edge) |
|---|---|
| Total PBAR PPF (400–800 nm) | 1,296 µmol/s |
| Efficacy | 2.70 µmol/J |
| Dimming | 0–10V; requires a controller (EDGE Controller sold separately). Full output without one. |
| Input voltage | 120–277V AC |
| Tent size | 49.21" × 26.77" × 75.98" |
| Warranty | 5 years fixtures, 2 years tent |
Lighting (per fixture)
| Power | 160W |
|---|---|
| PPF | 432 µmol/s (400–800 nm); 416 µmol/s (400–700 nm) |
| Average PPFD | 400 µmol/m²/s across a 2' × 4' area at 100% output, 12'' above the canopy |
| Spectrum | Sun White Pro, 5,200K, CRI 86, with 660 nm red and 730 nm far red |
| Size and weight | 46.5" × 13.25" × 2.0", 7.9 lbs |
| Mounting | Hydroponic hangers on four mounting clips (6 hangers included) |
Electrical & Control
| Total amperage at 120V | 4 amps |
|---|---|
| Control | RJ11, 0–10V. Active Grow EDGE Controller sold separately. |
| Power daisy chain | Up to 3 fixtures at 120V, 4 at 208V, 5 at 240V, 6 at 277V. This kit uses all 3 at 120V. |
| Control daisy chain | RJ11, fixture to fixture (separate from power) |
| Cables included | 3 RJ11 dimming cables; 3 power and daisy-chain cords |
Walden White 3-Tier Tent
| Shelves | 3 shelves, 49.21" × 26.77" each, 100 lbs capacity, 18" apart |
|---|---|
| Ports | Three 6" ducting, two 4" electrical, one roll-up mesh vent |
| Weight | 46.3 lbs; assembly required |
Warranty & Certifications
| Warranty | Fixtures 5 years, tent 2 years. See warranty details |
|---|---|
| Certifications | CE |
Disconnect power before installation, adjustment, or servicing. Do not modify the luminaire housing or exceed the maximum number of fixtures in a power chain, and follow applicable circuit, connector, and electrical-code requirements.
Grow Smarter, Not Harder
Let us know how we can help you grow happier and healthier plants in your home or commercial facility
